- zhhivi@hivi.com
·Product featurew
TE series professional power amplifiers have novel appearance, exquisite workmanship, reliable quality and perfect protection circuit. Classic class AB circuit design, using high-performance Sanken power tube, the pursuit of perfect sound. Each pair of power amplifier tubes undergoes strict testing and screening to ensure the consistency and minimum distortion of the power amplifier. Independent tunnel-type air duct heat dissipation, adopts intelligent temperature control to adjust the wind speed, and keeps the power amplifier working at low temperature.
·Parameters
|
Parameters |
|||
|
Model |
TE2300 |
TE2400 |
TE2600 |
|
Output power(8Ω) |
2×300W |
2×400W |
2×600W |
|
Output power(4Ω) |
2×520W |
2×680W |
2×1050W |
|
Bridging(8Ω) |
900W |
1300W |
2000W |
|
Input sensitivity |
0.775V/1V/1.4V |
||
|
Input impedance |
20KΩ |
||
|
Frequency response |
20Hz~20KHz |
||
|
Total harmonic distortion |
≤0.08% |
||
|
Conversation speed |
20V/usec |
||
|
SNR |
99dB |
||
|
Damping coefficient |
＞200 |
||
|
N.W.(±10%) |
22Kg |
25Kg |
28Kg |
|
Size |
482X438X88 |
||
|
Voltate |
~220V 50Hz |
||
|
Protection |
Soft Start / DC / Short Circuit / Overload / Clipping / Distortion Limiting / Overheating |
||
|
Model |
|
TE1300 |
TE2900 |
|
Output Power (Watts) |
20-20kHz,0.05%THD,8Ω/Ch |
1200 |
9oo |
|
20-20kHz,0.1%THD,4Ω/Ch |
1800 |
1350 |
|
|
Bridge mono |
20-20kHz,0.1%THD,8Ω |
3000 |
2250 |
|
Frequency response |
20-20kHz,土0.5dB |
||
|
SNR |
20-20kHz,-102dB( Unweighted) |
||
|
Voltage gain |
38-2dB |
||
|
Input sensitivity |
0.86Vrms |
||
|
Rated power 8Ω |
1.23(+4.0dBu) |
||
|
Output line type |
AB/H |
||
|
Input impedance |
10k (ohms unbalanced), 20k (ohms balanced) |
||
|
Dynamic |
4Ω時2dB |
||
|
Damping factor |
8Ω>500 |
||
|
Amplifier Protection |
Short circuit, open circuit, thermal, ultrasonic and RF protection. Stable to reactive or mismatched loads |
||
|
Cooling |
Continuously variable speed fan; rear-to-front airflow across heatsinks |
||
|
Front of controller |
AC switch, gain controller (each channel) 21 gears |
||
|
Rear of controller |
Input configuration switch (stereo, parallel, bridge) |
||
|
LED indicator |
Power (Green x2), Signal (Green x2), Clip (Yellow x2), Protection (Red x2) |
||
|
Connector |
Input: 1/4" TRS and female XLR; 20k ohm balanced, 10k ohm unbalanced |
||
|
Loaded protection |
Mute on/off, DC fault blocking, clip limiting, infrasound filtering (-3dB at 5Hz) |
||
|
Power |
220-240VAC，50-60Hz。 |
||
|
Size |
48.3cm(W)x8.9cm(H)x35.3cm(D) (from front mounting pole. Including rear support handle) |
||
|
Weight |
|
29.5kg(N.W) |
23.5kg(N.W.) |
|
Product Description |
||
|
TE series professional power amplifiers have novel appearance, exquisite workmanship, reliable quality and perfect protection circuit. Classic class AB circuit design, using high-performance Sanken power tube, the pursuit of perfect sound. Each pair of power amplifier tubes undergoes strict testing and screening to ensure the consistency and minimum distortion of the power amplifier. Independent tunnel-type air duct heat dissipation, adopts intelligent temperature control to adjust the wind speed, and keeps the power amplifier working at low temperature.
|
||
|
Product Parameters |
||
|
Model |
TE4350 |
TE3600 |
|
Output power(8Ω) |
4×350W |
3×600W |
|
Output power((4Ω) |
4×550W |
3×1000W |
|
Bridging(8Ω) |
2X1000W |
|
|
Input sensitivity |
1V |
|
|
Input impedance |
20KΩ |
|
|
Frequency resopnse |
20Hz~20KHz |
|
|
Total harmonic distortion |
0.01% |
|
|
Conversion speed |
20V/usec |
|
|
SNR |
99dB |
|
|
Damping coefficient |
＞200 |
|
|
N.W.(±10%) |
28Kg |
32Kg |
|
Size |
482X438X88 |
512X438X88 |
|
Voltage |
220V 50Hz |
|
